Product Manual
- Capacity :10 litres
- Tank made of thick steel sheet, pressure tested at 16 bar
- Tank internal protection with "DURO GLASS" special enamel coating (More)
- Tank protected by an extra large magnesium anode produced by ELCO (More)
- Low charge 316L resistance
- Resistance power 1,5 kW
- Safety thermostat with special built-in thermoelectric fuse (More)
- Safety valve with membrane and drainage (More)
- Heating element indication lamp
- Large inspection flange for easier cleaning and maintenance of the water heater
- HCFC free, rigid polyurethane insulation (More)
Models: VERTICAL wall mounted & FLOOR mounted
TECHNICAL SPECIFICATIONS OF ELECTRIC WATER HEATER
ELCO DURO GLASS 10 L
CAPACITY |
L |
10 |
ELECTRIC POWER |
kW |
1,5 |
CURRENT |
A |
6,5 |
VOLTAGE (50/60 Ηz) |
V |
220-240 |
CONNECTING CABLE NOM CROSS SECTION |
mm2 |
2,5 |
CONNECTIONS TO THE SUPPLY NETWORK |
G ½” |
|
OPERATING PRESSURE |
bar |
Mximum allowable 10 |
THERMOSTAT |
Control range 30 - 80oC, thermal cut-off protection |
|
INSULATION |
HCFC free, rigid polyurethane foam |
|
DEGREE OF PROTECTION AGAINST HUMIDITY |
IP23 |
|
WEIGHT (EMPTY) |
kg |
7 |
HEATING TIME INDICATION at ΔΤ 45 oC |
Hours:Minutes |
0:24 |
DIMENSIONS OF ELECTRIC WATER HEATER
ELCO DURO GLASS 10 L
DIMENSIONS (mm) |
PACKING DIMENSIONS (mm) |
||||||||||
L |
A |
B |
C |
D |
E |
Ζ |
H |
G |
LENGTH
|
WIDTH
|
HEIGHT
|
10 |
168 |
100 |
95 |
156 |
415 |
445 |
- |
260 |
440 |
290 |
290 |
Specifications subject to change without notice